WARRIOR Super Acrylic
Back to Acrylic Based Paints
Warrior Super Acrylic is a highly durable and washable matt P.V.A. If applied correctly Warrior Super Acrylic will give a product life in excess of 5 years.
USES:
Warrior Super Acrylic can be used for interior or exterior purposes on brick, plastered walls, concrete or any similar type masonry surface.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
a) Raw Plaster - Apply one coat Warrior Alkali Resistant Plaster Primer or Warriorfill™. Allow it to dry for + 4 hours. Thereafter apply two coats of Warrior Super Acrylic.
b) Previously Painted Surfaces - Apply 2 coats of Warrior Super Acrylic. Allow 3-4 hours drying time between coats.
PROPERTIES :
APPLICATION: Brush, Roller and Spray* CLEANING SOLVENT: Water
THINNING SOLVENT: Water
SPREADING RATE:
- PRIMER COAT : 4-6 m² per litre
- FINAL COAT : + 6-8 m² per litre
DRYING TIMES:
- SURFACE DRY : 1 hour
- HARD DRY : 3-4 hours
- OVERCOATING : 3-4 hours
PACK SIZE: 1L, 5L, 20L (200L on request)
COLOUR RANGE: White, Pastel and medium to deep colours
VISCOSITY: 120-130 KU
FLASH POINT: Non flammable
SCRUB RESISTANCE: >10 000 Oscillations
RELATIVE DENSITY 1,35 + 0,05 kg per litre
GENERAL INFORMATION :
*For spray application consult our Technical Department.
It is important that this product be thoroughly mixed with a flat paddle before use.
Contact us for the Warrior Super Acrylic Paint.
|
