First Choice Alkali Resistant Plaster Primer
Back to first choice paints
Download this page
First Choice Alkali Resistant Plaster Primer is an economical solvent based white pigmented primer/sealer which is formulated to resist the effects of alkalinity on subsequent coats of paint.
USES :
First Choice Alkali Resistant Plaster Primer is recommended for use on brick, plaster, concrete, fibre-cement surface, rhinolite and masonry surfaces.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
- Surface preparation and application : Essential for good paint performance is a sound substrate that has been properly prepared and cleaned. The standard conditions for the preparation of plastered/masonry surfaces apply.
- Surface preparation for old/previously painted masonry surfaces: Previously painted surfaces in poor condition must be stripped back to a firm base or the original substrate. All lime washed/distempered surfaces must be removed. All surfaces must be clean, dry and free of dirt and surface contamination before any application of paint.
PROPERTIES :
APPLICATION: Brush or Roller
CLEANING SOLVENT: Mineral Turpentine
THINNING SOLVENT: Thinning not recommended
SPREADING RATE:
- PRIMER COAT : 6-8 m² per litre (depending on surface porosity)
- FINAL COAT : N/A
DRYING TIMES
- SURFACE DRY : 1-2 hours
- HARD DRY : 4 hours
- OVERCOATING : 16 hours
PACK SIZE: 1L, 5L, 20L
COLOUR RANGE: White only
SPECIFIC GRAVITY: 1,13 + 0,05 kg per litre
VISCOSITY: 75-80 KU
FLASH POINT: >35° C
FINISH: Matt
GENERAL INFORMATION :
It is important that this product be thoroughly mixed with a flat paddle before use.
Contact us for the First Choice Alkali Resistant Plaster Primer.