FIRST CHOICE TEXTURED COATING
First Choice Textured Coating is a flexible exterior acrylic textured coating, which contains mica and marble. First Choice Textured Coating is guaranteed for a period of 7 years subject to the terms and conditions of the Warrior Seven Year Guarantee.
First Choice Textured Coating is suitable for bridging hairline cracks. It contracts and expands with the substrate guarding against harsh weather conditions. It is also used on uneven surface areas to give an even textured finish.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM:
On new plaster, apply one coat of First Choice Water Based Alkali Resistant Plaster Primer as a first coat. Ensure that the texture coating is properly mixed with a flat paddle. Apply two coats First Choice Textured Coating. For surfaces, which have already been coated with an Acrylic P.V.A., ensure that the surface is prepared accordingly before applying two coats of First Choice Textured Coating.
APPLICATION: Brush, Roller
CLEANING SOLVENT: Water
THINNING SOLVENT: Water
SPREADING RATE: FINAL COAT: 3-5 m’ per litre
DRYING TIMES: SURFACE DRY: 2 hours
HARD DRY: 4-6 hours
OVERCOATING: 4-6 hours
PACK SIZE: 1L, 5L, 20L
COLOUR RANGE: White and a range of popular medium and deep
VISCOSITY: 125-130 KU
FLASH POINT: Non flammable
FINISH: Textured, Matt
RELATIVE DENSITY 1, 48 + 0, 05 kg per litre
- Do not thin this product as it is ready for
- This product is not suitable for spray
- It is important that this product be thoroughly mixed with a flat paddle before use.
- As per standard painting practices, no painting should take place if surface or ambient temperatures are below 10’C or above 30”C. Painting should cease at 3pm or when rain is imminent.