Choose a colour
acrylic_paint
What makes Warrior Paints different is our fantastic colour range together with our colour matching expertise. If you can dream it we can make it.

Visit our stores and see the amazing display of Warrior colours. Colour testers and swatches of all Warrior Standard Colours are available in store.

Warrior Water Based Alkali Resistant Plaster Primer

Back to Warrior Water based Primers and Fillercoats

Warrior Water Based Alkali Resistant Plaster Primer is a fast drying low VOC product, when compared to similar conventional solvent-based primers. It is a white-pigmented alkali resistant plaster primer, which is formulated to resist the effects of alkalinity on subsequent coats of paint. It dries quickly to a hard matte finish and has excellent penetrating and binding properties. /p>

Warrior Water Based Alkali Resistant Plaster Primer is recommended for use on any brick, plaster, concrete and fibre-cement surfaces. It is also recommended for use on masonry rhinolite surfaces.

SPECIFICATION OR RECOMMENDED PAINT SYSTEM : 

1. Surface preparation and application : Essential for good paint performance is a sound substrate that has been properly prepared and cleaned. The standard conditions for the preparation of plastered/masonry surfaces apply.

2. Surface preparation for old/previously painted masonry surfaces: Multiple layers of previous paint in poor condition must be stripped back to a firm base or the original surface. All lime wash/distemper surfaces must be scraped off and brushed down to a firm base. All surfaces must be clean, dry and free of dirt and surface contamination before any application of paint.

PROPERTIES :

APPLICATION: Brush or Roller

CLEANING SOLVENT: Water

THINNING SOLVENT: Thinning not recommended

SPREADING RATE: PRIMER COAT: 6-8m² per litre (depending on surface porosity)

FINAL COAT: N/A

DRYING TIMES: SURFACE DRY: 1 hour

HARD DRY: 4 hours

OVERCOATING: For water based topcoats, 4-6 hours.

For solvent based topcoats, 24 hours.

PACK SIZE: 250ML, 1L, 5L, 20L, 200L on request

COLOUR RANGE: White only

SPECIFIC GRAVITY: 1.40 + 0,05 kg per litre

VISCOSITY: 90-100 KU

FLASH POINT: Non flammable

FINISH: Matte

GENERAL INFORMATION :

  • It is impor­tant that this product be thoroughly mixed with a flat paddle before use.

Please note that the drying time prior to over-coating is 24 hours, if Warrior Water Based Plaster Primer is to be over coated with alkyd based enamels such as Super Gloss Enamel or Eggshell Enamel.