Skip to main content
012 541 3596

Warriorfill / Ceiling Paint

Warriorfill™/Ceiling Paint

Back to Warrior Water based Primers and Fillercoats

Warriorfill™/Ceiling Paint is a heavy bodied acrylic filler coat/primer with good filling and obliterating properties. It is quick drying and can be easily applied by brush or roller.

USES :

Warriorfill™ /Ceiling Paint  is an excellent first coater for raw plaster walls or a first and final coating for ceilings. It is a highly filled water based paint with excel­lent oblite­ration properties.

SPECIFICATION OR RECOMMENDED PAINT SYSTEM :

Ensure all surfaces to be painted are clean and free from dust, moisture, grease, etc. Apply one or two coats Warrior-f­ill™, depending on porosity of surface. Allow the Warriorfill™ to dry for + 3-4 hours before overcoating.

PROPERTIES :

APPLICATION: Brush, Roller or Spray

CLEANING SOLVENT: Water

THINNING SOLVENT: Water

SPREADING RATE:

  • PRIMER COAT : Depending on porosity of surface + 4-6 m² per litre
  • FINAL COAT : 6 m² per litre

DRYING TIMES:

  • SURFACE DRY : 1 hour
  • HARD DRY : 3-4 hours

PACK SIZE: 5L, 20L (200L on request)

COLOUR RANGE: White only

SPECIFIC GRAVITY: 1,50 + 0,05 kg per litre

VISCOSITY: 120-130 KU

FLASH POINT: Non Flammable

FINISH: Matt

GENERAL INFORMATION :

a) If this product is used as a finishing coat on ceilings all bare metal areas (e.g. nail heads) must be primed with a metal primer.

b) Warriorfill ™ is mainly applied to new surfaces and is not normally recommended on previously painted surfaces.

c) It is impor­tant that this product be thoroughly mixed with a flat paddle before use.

Contact us for Warriorfill™

Leave a Reply