Warriorfill / Ceiling Paint
Warriorfill™/Ceiling Paint
Back to Warrior Water based Primers and Fillercoats
Warriorfill™/Ceiling Paint is a heavy bodied acrylic filler coat/primer with good filling and obliterating properties. It is quick drying and can be easily applied by brush or roller.
USES :
Warriorfill™ /Ceiling Paint is an excellent first coater for raw plaster walls or a first and final coating for ceilings. It is a highly filled water based paint with excellent obliteration properties.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
Ensure all surfaces to be painted are clean and free from dust, moisture, grease, etc. Apply one or two coats Warrior-fill™, depending on porosity of surface. Allow the Warriorfill™ to dry for + 3-4 hours before overcoating.
PROPERTIES :
APPLICATION: Brush, Roller or Spray
CLEANING SOLVENT: Water
THINNING SOLVENT: Water
SPREADING RATE:
- PRIMER COAT : Depending on porosity of surface + 4-6 m² per litre
- FINAL COAT : 6 m² per litre
DRYING TIMES:
- SURFACE DRY : 1 hour
- HARD DRY : 3-4 hours
PACK SIZE: 5L, 20L (200L on request)
COLOUR RANGE: White only
SPECIFIC GRAVITY: 1,50 + 0,05 kg per litre
VISCOSITY: 120-130 KU
FLASH POINT: Non Flammable
FINISH: Matt
GENERAL INFORMATION :
a) If this product is used as a finishing coat on ceilings all bare metal areas (e.g. nail heads) must be primed with a metal primer.
b) Warriorfill ™ is mainly applied to new surfaces and is not normally recommended on previously painted surfaces.
c) It is important that this product be thoroughly mixed with a flat paddle before use.
Contact us for Warriorfill™