Choose a colour
acrylic_paint
What makes Warrior Paints different is our fantastic colour range together with our colour matching expertise. If you can dream it we can make it.

Visit our stores and see the amazing display of Warrior colours. Colour testers and swatches of all Warrior Standard Colours are available in store.

Warrior SABS Utility Acrylic

Back to SABS Products
Download this page

Warrior SABS Utility Acrylic is a utility grade matt acrylic paint with good filling and obliterating properties. It has been formulated to meet the requirements of SABS 1586:1995 GRADE 4 specifications for Emulsion Paints.

USES:

Warrior SABS Utility Acrylic is recommended for interior use only. It is ideal for use on projects where an economic finish with limited washability is required. It can also be use as a first coater on raw plaster or as a ceiling paint.

SPECIFICATION OR RECOMMENDED PAINT SYSTEM :

On new plaster: Apply one coat Warriorfill™ or Warrior SABS Utility Acrylic. Allow to dry for + 3 hours. Thereafter apply two coats Warrior SABS Utility Acrylic allowing 3-4 hours drying time between coats.

PROPERTIES:

APPLICATION: Brush, Roller and Spray*

CLEANING SOLVENT: Water

THINNING SOLVENT: Water

SPREADING RATE: PRIMER COAT: 4-6 m 2 per litre

FINAL COAT: 6-8 m² per litre

DRYING TIMES:

  • SURFACE DRY: 1 hour
  • HARD DRY: 4 hours
  • OVERCOATING: 4 hours

PACK SIZES: 1L, 5L, 20L

COLOUR RANGE: White only

SPECIFIC GRAVITY: 1.5 ± 0.05 kg per litre

VISCOSITY: 120-130 Krebb Units (KU)

MASS SOLIDS: 60-65%

REFLECTANCE: >85%

GENERAL INFORMATION :

*For spray application consult our Technical Department.

a) Please refer to the SABS 1586:1995 Specification on Emulsion Paints for a more detailed specification on Grade 4 paint.

b) It is impor­tant that this product be thoroughly mixed with a flat paddle before use.

Contact us for the Warrior SABS Utility Acrylic Paint.