Choose a colour
acrylic_paint
What makes Warrior Paints different is our fantastic colour range together with our colour matching expertise. If you can dream it we can make it.

Visit our stores and see the amazing display of Warrior colours. Colour testers and swatches of all Warrior Standard Colours are available in store.

DESCRIPTION:

Warrior Stone Sealer is a solvent based acrylic coating which is simple to use, quick drying, and offers excellent resistance to yellowing and alkaline attack. It enhances the natural colour and restores depth, giving an attractive gloss and long lasting finish.

USES:

Warrior Stone sealer can be applied interior or exterior on a wide range of masonry surfaces e.g. Brickwork, paving and concrete floors

SPECIFICATION OR RECOMMENDED PAINT SYSTEM:

New masonry surfaces: Ensure that the surface is dry, free from all forms of dirt, sand and loose plaster or cement. Apply two coats of Warrior Stone Sealer with a drying time of 16 hours between coats. For maintenance painting one coat may be applied.

PROPERTIES:

 APPLICATION:         Brush, Roller, and Spray
 CLEANING SOLVENT:  E thinners
 THINNING SOLVENT:  E thinners                 
 SPREADING RATE: PRIMER COAT: 6-8m² per litre
FINAL COAT: 8-10m² per litre
   
 DRYING TIMES:      SURFACE DRY: 2 hour
HARD DRY: 16 hours
OVERCOATING: 16 hours
 PACK SIZE: 1L, 5L
 COLOUR RANGE:     Clear only
FLASH POINT:   >9°C
 VISCOSITY  15-17 sec F4
 SPECIFIC GRAVITY:
 0, 91 + 0, 05 kg per litre
 FINISH: 
Gloss

 

GENERAL INFORMATION:

  1. Surfaces must be completely dry as any residual moisture in the substrate can result in blistering.
  2. It is impor­tant that this product be thoroughly mixed with a flat paddle before use.
  3. As per standard painting practices, no painting should take place if surface or ambient temperatures are   below 10⁰C or above 30⁰C. Painting should cease at 3pm or when rain is imminent.