-
PACK SIZE20 Litre, 5 Litre
-
VISCOSITY
120-130 Krebb Units (KU)
-
FLASH POINT
Non Flammable
-
SCRUB RESISTANCE:
+ 2000 Oscillations
-
RELATIVE DENSITY:
1,50 + 0,05 kg per litre
-
COLOURSWhite, African Eagle, Beach Pebble, Creamy Vanilla, Gray Mystic, Soft Touch
GENERAL INFORMATION :
*For spray application consult our Technical Department.
- Do not apply to bare metal surfaces.
It is important that this product be thoroughly mixed with a flat paddle before use.
Warrior General Purpose Acrylic PVA
Warrior General Purpose Acrylic PVA is a matt acrylic paint mainly for interior use with good filling and obliterating properties. It is ideal for use by contractors on projects where an economic finish with limited washability is required.
Warrior General Purpose Acrylic PVA has been specifically formulated for low cost housing, garages, concrete fencing and areas where economy is most important. Warrior General Purpose Acrylic PVA can also be used as a first coat on raw plaster or as a ceiling paint.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM
On new plaster : Apply one coat Warriorfill™. Allow to dry for + 3 hours. Thereafter apply two coats Warrior General Purpose Acrylic PVA allowing 3-4 hours drying time between coats.
PROPERTIES
-
APPLICATION:
Brush, Roller, Spray*
-
CLEANING SOLVENT:
Water
-
THINNING SOLVENT:
Water
-
SPREADING RATE::
PRIMER COAT : 4-6 m² per litre
FINAL COAT : + 6-8 m² per litre -
DRYING TIME:
SURFACE DRY : 1 hou
HARD DRY : 3-4 hour
OVERCOATING : 3-4 hours