WARRIOR HI HIDING CONTRACTORS PVA
Back to Acrylic Based Paints
Warrior Hi Hiding Contractors P.V.A is a heavy bodied acrylic P.VA. specifically formulated for the Builders/Contractor market as a low cost first and or finishing coat. It has excellent filling properties, very good whiteness when dry and is easy to apply
USES :
Warrior Hi Hiding Contractors P.V.A may be used as a first coat or as a final coat. First coat application would be on raw plaster, while final coat application would be for ceilings boundary walls, garages, etc. This product is used extensively on low cost housing projects.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
New Plaster : Ensure that surface to be coated is clean and dry. Apply one coat Warrior Econofill or Warriorfill as an undercoat, leave to dry for + 4 hours, then apply two coats Warrior Hi Hiding Contractors P.V.A allowing 4 hours drying time between coats.
PROPERTIES :
APPLICATION: Brush, Roller and Spray* CLEANING SOLVENT: Water
THINNING SOLVENT: Water
SPREADING RATE:
- PRIMER COAT : 4-6 m² per litre
- FINAL COAT : Depending on porosity of surface, + 5-7 m² per litre
DRYING TIMES:
- SURFACE DRY : 1 hour
- HARD DRY : 4 hours
- OVERCOATING : 4 hours
PACK SIZE: 5L, 20L (200L on request)
COLOUR RANGE White (colours on request)
VISCOSITY: 130-135 KU
RELATIVE DENSITY 1,40 + 0,05 kg per litre
GENERAL INFORMATION :
*For spray application consult our Technical Department.
It is important that this product be thoroughly mixed with a flat paddle before use.
Contact us for the Warrior HI Hiding Contractors PVA Paint