WARRIOR SUPER ACRYLIC
DESCRIPTION:
Warrior Super Acrylic is a highly durable and washable matt P.V.A. If applied correctly, Warrior Super Acrylic will give a product life in excess of 5 years.
USES:
Warrior Super Acrylic can be used for interior or exterior purposes on brick, plastered walls, concrete or any similar type masonry surface.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM:
- Raw Plaster – Apply one coat Warrior Water Based Alkali Resistant Plaster Primer to dry for + 4 hours. Thereafter apply two coats of Warrior Super Acrylic.
- Previously Painted Surfaces – Apply 2 coats of Warrior Super Acrylic. Allow 3-4 hours drying time between coats
PROPERTIES: | |||||||
APPLICATION: | Brush, Roller and Spray* | ||||||
CLEANING SOLVENT: | Water | ||||||
THINNING SOLVENT: | Water | ||||||
SPREADING RATE: | PRIMER COAT: 4-6 m² per litre | ||||||
FINAL COAT: + 6-8 m² per litre | |||||||
DRYING TIMES: | SURFACE DRY: 1 hour | ||||||
HARD DRY: 3-4 hours | |||||||
OVERCOATING: 3-4 hours | |||||||
PACK SIZE: | 1L, 5L, 20L (200L on request) | ||||||
COLOUR RANGE: | White, Pastel, Medium, Deep and Clear | ||||||
colours | |||||||
VISCOSITY: | 120-130 KU | ||||||
FLASH POINT: | Non flammable | ||||||
SCRUB RESISTANCE: | >10 000 Oscillations | ||||||
RELATIVE DENSITY | 1,35 + 0,05 kg per litre | ||||||
GENERAL INFORMATION:
*For spray application consult our Technical Department.
- It is important that this product be thoroughly mixed with a flat paddle before use.
- As per standard painting practices, no painting should take place if surface or ambient temperatures are or above 4). Painting should cease at 3pm or when rain is imminent.