Choose a colour
acrylic_paint
What makes Warrior Paints different is our fantastic colour range together with our colour matching expertise. If you can dream it we can make it.

Visit our stores and see the amazing display of Warrior colours. Colour testers and swatches of all Warrior Standard Colours are available in store.

WARRIOR WATER BASED ENAMEL

DESCRIPTION:

Warrior Water Based Enamel is a highly washable, stain resistant, tough, durable acrylic paint with a luxurious gloss finish for interior or exterior use.
It has been formulated as a world class environmentally friendlier product with low odour and quick drying properties.

USES:

Warrior Water Based Enamel can be used on suitably primed substrates such as steel, window frames, doors, trims and balustrades. Due to its outstanding adhesive properties Warrior Water Based Enamel, is ideal for overcoating previously painted sound surfaces including conventional solvent based alkyd enamels

SPECIFICATION OR RECOMMENDED PAINT SYSTEM:

  1. New Masonry Surfaces: All surfaces must be dry, free of dust, dirt, grease and other surface contamination. Apply one coat of Warrior Water Based Alkali Resistant Plaster Primer and allow to dry for 6 hours.
  2. Previously Painted Masonry Surfaces: Remove by scraping, wire brushing or sanding all soft powdered, blistered, loose or flaking paint. All surfaces should be washed and allowed to dry. All bare patches must be primed with Warrior Water Based Alkali Resistant Plaster Primer and allow to dry for 6 hours. In the case of boards or panels, all metal areas/nail heads, etc. should be spot primed with Warrior Metal Etch Primer and allow to dry for 6 hours. Remove all mould with Warrior Anti-Fungal Wash as per specification. Fill all imperfections with Warrior Ready Mixed Filler as per specifications. Spot prime all filled areas with Warrior Alkali Resistant Plaster Primer and allow to dry for 6 hours.
  3. New Galvanised and ferrous steel surfaces: Degrease surface and then prime with one coat of Warrior Metal Etch Primer and allow to dry for 6 hours.
  4. Wooden Surfaces: Apply one coat of Warrior Pink Wood Primer. Allow to dry for 16 hours. Finish with at least 2 coats of Warrior Water Based Enamel in colour of choice. Allow 4 hours drying time between coats.
    Gloss or semi-gloss surfaces must be lightly sanded with a fine abrasive to provide a good key for subsequent coats. Thereafter wash with sugar soap.

 

PROPERTIES:
APPLICATION: Brush, Roller and Spray*
CLEANING SOLVENT: Water
THINNING SOLVENT: Water
SPREADING RATE: PRIMER COAT: N/A
FINAL COAT: + 8-10 m² per litre
DRYING TIMES: SURFACE DRY: 1 hour
HARD DRY: 4 hours
OVERCOATING: 4 hours
SCRUB RESISTANCE: Washable (>10 000 Oscillations)
PACK SIZE: 1L, 5L
COLOUR RANGE: White, pastel and medium colours
RELATIVE DENSITY 1.20kg/l
VISCOSITY: 100-105ku
FLASH POINT: Non flammable