Choose a colour
acrylic_paint
What makes Warrior Paints different is our fantastic colour range together with our colour matching expertise. If you can dream it we can make it.

Visit our stores and see the amazing display of Warrior colours. Colour testers and swatches of all Warrior Standard Colours are available in store.

WARRIOR WAVE-COAT

Back to Acrylic Based Paints

Warrior Wave-Coat is a durable semi-sheen acrylic paint with a smooth ripple type finish.

USES :

Warrior Wave-coat is suitable for interior or exterior walls with slight imperfections such as rough plas­ter, pock marks, shutter lines, etc. It eliminates the necess­ity to re-plaster

SPECIFICATION OR RECOMMENDED PAINT SYSTEM :

SURFACE PREPARATION:

a) New plaster, cement renderings and concrete : Brush down or scrape to remove all plaster or hard mortar splashes and other surface contamination. Ensure surface is dry or properly cured. Make good any cracks and repair any defects to match porosity and profile of surrounding areas.

b) Previously painted masonry surfaces : Scrape or brush down to remove all loose and flaking paint or strip back if necessary to a firm base. Make good all cracks and surface defects. Loose and powdered surfaces should be brushed down with a stiff fibre brush and sealed with Warrior Alkali Resistant Plaster Primer.

FINISHING:

a) Apply one coat of Warrior Alkali Resistant Plaster Primer to masonry surface areas and allow to dry.

b) Finish with two coats of Warrior Wave-Coat allowing 12-24 hours in between coats.

PROPERTIES :

APPLICATION:

  • Sheepskin Roller or Broad
  • brush with polyurethane
  • foam roller to finish

CLEANING SOLVENT: Water

THINNING SOLVENT: Not recommended

SPREADING RATE:

  • PRIMER COAT : Spreading rate will be determined by the technique used on application

DRYING TIMES:

  • TOUCH DRY : 4 hours
  • HARD DRY : 12 hours
  • OVERCOATING : overnight

PACK SIZE: 5L, 20L

COLOUR: Off White only (colours on request)

VISCOSITY: 130-140 KU

FLASH POINT: Non flammable

RELATIVE DENSITY 1,45 + 0,05 kg per litre

FINISH: Low sheen

GENERAL INFORMATION :

  • This product should not be thinned as it is supplied ready for use.
  • It is impor­tant that this product be thoroughly mixed with a flat paddle before use.

Contact us for the Warrior Wave-Coat Paint