Warrior Water Repellant
WARRIOR WATER REPELLENT
DESCRIPTION :
Warrior Water Repellent in a clear water based product for imparting water repellency to porous construction materials eg. Face brick, plaster and concrete.
USES :
Warrior Water Repellent is designed to prevent penetration of water, from rain or sprinklers, through face brick walls or any other porous building material. The product is clear and is therefore suitable for use where coating with a conventional waterproofing system is not possible. Warrior Water Repellent can be over-coated with conventional paint systems. It is not suitable for use in ponding situations, or for the waterproofing of roofs.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
Surface Preparation :
Ensure that surface is clean, dry and free from dust.
Application :
Apply one coat by spray, roller or brush until the substrate is saturated. When coating brick walls it is important to ensure that the cement between the bricks is completely wetted. Due to differing porosities of building materials the spreading rates are intended as a guide only.
PROPERTIES :
APPLICATION: Spray, Brush or Roller
CLEANING SOLVENT: Water
THINNING SOLVENT: Do not thin
SPREADING RATE: 10 m²/l
DRYING TIMES: 1 hour
PACK SIZE: 1L, 5L
COLOUR RANGE : Clear
SPECIFIC GRAVITY: 1.00 kg per litre
VISCOSITY: 10 seconds F4
FLASH POINT: Non flammable