Warrior White Wood Primer

Back to Warrior Acrylic Primers and Sealers

Warrior White Wood Primer is an Alkyd/Oil based wood primer which penetrates and seals the wood providing an excellent primed surface for subsequent decorative finishes. It provides an excellent balance between filling, penetration and adhesion and is easy to apply.

USES :

Warrior White Wood Primer is designed for use on all types of interior/exterior wooden surfaces.

SPECIFICATION OR RECOMMENDED PAINT SYSTEM :

Ensure surface to be coated is clean and dry, free from dust, oils and grease etc. Apply one coat of Warrior White Wood Primer, leave to dry for 24 hours, then sand lightly to form a key. Dust off and apply the Warrior finishing coat of your choice.

PROPERTIES :

APPLICATION: Brush, Roller and Spray*

CLEANING SOLVENT: Mineral Turpentine

THINNING SOLVENT: Mineral Turpentine

SPREADING RATE:

• PRIMER COAT : 6-8m² per litre (depending on surface porosity)
• FINAL COAT : N/A

DRYING TIMES:

• SURFACE DRY : 4 hours
• HARD DRY: 16-24
• OVERCOATING : overnight

PACK SIZE: 1L, 5L,

COLOUR RANGE: White only

SPECIFIC GRAVITY: 1,2 + 0,05 kg per litre

VISCOSITY: 75-80 KU

FLASH POINT: >35°C

FINISH: Matt

GENERAL INFORMATION :

*For spray application contact our Technical Department.

a) This product may be over coated with conventional decorative enamels and undercoats.

b) It is impor­tant that this product be thoroughly mixed with a flat paddle before use.

Contact us for the Warrior White Wood Primer.