Warrior Spirits of Salts
Warrior Spirits of Salts is a diluted hydrochloric acid solution supplied ready for use. It may be diluted further for etching new clean surfaces.
Warrior Spirits of Salts is used as an etching solution for the preparation of new and old concrete and cement screed e.g. domestic garages and industrial workshop floors etc.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
RECOMMENDED APPLICATION :
Apply liberally to areas to be etched or cleaned using a block brush or hard brittle broom for large areas. Leave for 15-20 minutes to react with concrete and then wash off with plenty of water and allow to dry completely before any paint is applied to surface.
APPLICATION: Brush or broom
CLEANING SOLVENT: Water
THINNING SOLVENT: Water
SPREADING RATE: Approx 8-10 m² per litre, but can vary depending on porosity of substrate
PACK SIZE: 750ml and 5L
SPECIFIC GRAVITY: 1.0 kg per litre
FLASH POINT: Non flammable
GENERAL INFORMATION :
SAFETY PRECAUTIONS :
a) Highly corrosive. Avoid any contact with the skin or eyes. Any spillage’s or splashes must be washed off immediately with water. If eye contact occurs, seek immediate medical attention.
b) Wear safety clothing, gumboots, goggles and gloves when working with Warrior Spirits of Salts.
Contact us for the Warrior Spirits of Salts.