Choose a colour
acrylic_paint
What makes Warrior Paints different is our fantastic colour range together with our colour matching expertise. If you can dream it we can make it.

Visit our stores and see the amazing display of Warrior colours. Colour testers and swatches of all Warrior Standard Colours are available in store.

Warrior Clear Acrylic Sealer

Back to Waterbased Sealers

Warrior Clear Acrylic Sealer is a milky white liquid, which dries to a clear natural glazed finish. It is a general purpose sealer which is easy to clean and enhances the natural appearance of the surface.

USES :

Warrior Clear Acrylic Sealer can be used on a variety of masonry surfaces e.g. brick walls, tiles, etc. It is recommended mainly for interior surfaces as a brick and slasto wall cladding. This product is not suitable for trafficable areas.

SPECIFICATION OR RECOMMENDED PAINT SYSTEM :

Ensure the surface is clean and free from loose cement, sand or brick chips. Apply two coats of Warrior Clear Acrylic Sealer allowing 4 hours drying time between coats.

PROPERTIES :

APPLICATION: Brush, Roller or Spray*

CLEANING SOLVENT: Water

THINNING SOLVENT: Water

SPREADING RATE:

  • PRIMER COAT : N/A
  • FINAL COAT : Depending on porosity of surface, between 8-10 m² per litre

DRYING TIMES:

  • SURFACE DRY : 1 hour
  • HARD DRY : 4 hours

PACK SIZE: 1L, 5L

COLOUR RANGE: Clear only

SPECIFIC GRAVITY: 1,00 + 0,05

VISCOSITY: 70-75KU

FLASH POINT: Non flammable

FINISH: Sheen

GENERAL INFORMATION :

* For spray application consult our Technical Department

  • This product is not suitable for chalked powdery surfaces as it has limited penetrating properties.
  • It is impor­tant that this product be thoroughly mixed with a flat paddle before use.

Contact us for the Warrior Clear Acrylic Sealer.