Warrior School Board Paint Black
Back to Warrior Alkyd or Oil Based Decorative Paints
Warrior School Board Paint Black is an alkyd based, highly pigmented matt coating with excellent non-reflective properties, good abrasion resistance, which accepts chalk without skidding, and is easy to clean.
USES :
Warrior School Board Black can be applied to any suitably primed surface, which is to be used as a black board e.g. masonite board, steel, chipboard, fibre cement board etc. It may also be used as a decorative matt finish for interior use.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
1. Surface preparation: Surfaces must be clean and perfectly dry prior to painting. New composition and fibre cement boards should be sealed with Warrior Alkali Resistant Bonding Liquid. Steel and wooden surfaces must be primed with the appropriate primers. Previously painted surfaces must be in sound condition and lightly sanded before applying this product as the finishing coat.
2. Finishing: For new work apply two coats of Warrior Schoolboard Black allowing 16-18 hours drying time between coats. For general maintenance apply one coat.
PROPERTIES :
APPLICATION: Brush, Roller or Spray*
CLEANING SOLVENT: Mineral Turpentine
THINNING SOLVENT: Mineral Turpentine
SPREADING RATE:
- PRIMER COAT : N/A
- FINAL COAT : 8-12 m² per litre
DRYING TIMES:
- SURFACE DRY : 3-4 hours
- HARD DRY : 16 hours
- OVERCOATING : overnight
PACK SIZE: 1L, 5L
COLOUR RANGE: Black
SPECIFIC GRAVITY: 1,30 +0,05 kg per litre
VISCOSITY: 70-75 KU
FLASH POINT: >35° C
FINISH: Matt
GENERAL INFORMATION :
*This material is not normally recommended for spray application due to its highly filled nature.
It is important that this product be thoroughly mixed with a flat paddle before use.
Contact us for the Warrior School Board Paint Black.