Skip to main content
012 541 3596

Warrior Syglo Satin Enamel

 

Warrior Syglo Satin Enamel

Back to Warrior Alkyd or Oil Based Decorative Paints

Warrior Syglo Satin Enamel is an extremely tough non-drip polyurethane enamel which dries to a hard, chip resistant coating with a luxurious satin finish.

USES :

Warrior Sylglo Satin Enamel is ideal­ly suited for bathrooms, kitchens and surfaces where hygiene is of impor­tance. It can be used on any suitably primed interior surface or as an alternative to Super Gloss Enamel where a lower gloss and harder finish is required.

SPECIFICATION OR RECOMMENDED PAINT SYSTEM :

1. Ferrous Steel: One coat Warrior One Pack Etch Primer or Metal Etch Primer and one coat of Warrior Universal Undercoat.

2. Wood: One coat Warrior White Wood Primer and Warrior Universal Undercoat.

3. Masonry: One coat Warrior Alkali Resistant Plaster Primer and one coat Warrior Universal Undercoat.

4. Galavised Iron Products: One coat Warrior One Pack Etch Primer or Metal Etch Primer and then one coat Warrior Universal Undercoat.

5. P.V.C. or Glass: One coat Warrior Universal Undercoat.

PROPERTIES :

APPLICATION: Brush, Roller and Spray

CLEANING SOLVENT: Mineral Turpentine

THINNING SOLVENT: Mineral Turpentine

SPREADING RATE:

  • PRIMER COAT : N/A
  • FINAL COAT : 8-10m² per litre

DRYING TIMES:

  • SURFACE DRY : 3-4 hours
  • HARD DRY : 16 hours
  • OVERCOATING :

PACK SIZE: 1L, 5L

COLOUR RANGE: White, pastels and deep colours

SPECIFIC GRAVITY: 1,2 + 0,05 kg per litre

VISCOSITY: Non-drip Gel

FLASH POINT: >25°C

FINISH: Satin Sheen

GENERAL INFORMATION :

a) All undercoats must be thoroughly dry and lightly rubbed down with sand /floor paper before application of the first coat of Warrior Syglo Satin Enamel.

Contact us for the Warrior Syglo Satin Enamel.

Leave a Reply