First Choice High Gloss Enamel
First Choice High Gloss Enamel
Back to first choice paints
Download this page
First Choice High Gloss Enamel is a cost effective alkyd based gloss enamel paint specifically formulated for the contracting market. It has regular obliteration, gloss and durability.
USES :
First Choice High Gloss Enamel is fir interior or exterior use on a wide range of suitably primed substrates eg. wood, steel, masonry, P.V.C. and glass.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
The following undercoats and/or primers should be applied before re-coating with two coats of First Choice High Gloss Enamel:
- Ferrous Steel – One coat of either Warrior One Pack Etch Primer or Warrior Metal Etch Primer and then over coated with one coat of First Choice Universal Undercoat.
- Galvanised Steel – One coat of either Warrior One Pack Etch Primer or Warrior Metal Etch Primer and then over coated with one coat of First Choice Universal Undercoat.
- Wood – One coat Warrior Wood Primer and one coat First Choice Universal Undercoat.
- Masonry – One coat First Choice Alkali Resistant Plaster Primer and one coat First Choice Universal Undercoat
- P.V.C. or Glass – One coat First Choice Universal Undercoat.
PROPERTIES :
APPLICATION: Brush, Roller and Spray*
CLEANING SOLVENT: Mineral Turpentine
THINNING SOLVENT: Mineral Turpentine
SPREADING RATE:
- PRIMER COAT : N/A
- FINAL COAT : 8-10 m² per litre
DRYING TIMES:
- SURFACE DRY : 4 hours
- HARD DRY : overnight
- OVERCOATING :16 hours
PACK SIZE: 1L and 5L
COLOUR RANGE: It is important that this product be thoroughly mixed with a flat paddle before use White, Black, Golden Brown and Cream
SPECIFIC GRAVITY: 1,02 + 0,05 kg per litre
VISCOSITY: 70-75 KU
FLASH POINT: >35°C
FINISH: Gloss
GENERAL INFORMATION :
*For spray application consult our Technical Department.
It is important that this product be thoroughly mixed with a flat paddle before use.
Contact us for the First Choice High Gloss Enamel.