Warrior Woodtreat Wood Rejuvenator
DESCRIPTION:
Warrior Woodtreat Wood Rejuvenator is a white crystalline oxalic acid which when mixed with water may be used for the bleaching of aged wood.
USES:
Wood, which has been exposed to the elements, develops an unsightly greyish appearance. Warrior Woodtreat Wood Rejuvenator is used to bleach wood back to its original appearance prior to varnishing or staining.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM
RECOMMENDED APPLICATION
Sand wood lightly, to expose grain. Reduce the Warrior Woodtreat Wood Rejuvenator to a liquid form by dissolving the oxalic acid crystals in one litre of warm water in a plastic container stirring with the wooden paddle provided. Apply Warrior Woodtreat Wood Rejuvenator Liquid to wood using a scrubbing brush and allow to react for one hour. Rinse wood with clean water and allow to dry completely. A second application may be required on heavily stained surfaces. Wood can then be coated with Warrior Woodtreat Products as per the specifications.
PROPERTIES:
| APPLICATION: | Brush |
| CLEANING SOLVENT: | Water |
| THINNING SOLVENT: | Do not thin |
| SPREADING RATE: | 6-8 m² per litre depending on porosity of wood |
| PACK SIZE: |
1L |
| FLASH POINT: | Non-Flammable |
GENERAL INFORMATION:
SAFETY PRECAUTIONS:
- Avoid any contact with the skin or eyes. Any spillages or splashes must be washed off immediately with water.
- Wear safety clothing, gumboots, goggles and gloves when working with Warrior Wood Rejuvenator.
As per standard painting practices, no painting should take place if surface or ambient temperatures are below 10⁰C or above 30⁰C. Painting should cease at 3pm or when rain is imminent