WARRIOR GENERAL PURPOSE ACRYLIC PVA
Back to Acrylic Based Paints
Warrior General Purpose Acrylic PVA is a matt acrylic paint mainly for interior use with good filling and obliterating properties. It is ideal for use by contractors on projects where an economic finish with limited washability is required.
Warrior General Purpose Acrylic PVA has been specifically formulated for low cost housing, garages, concrete fencing and areas where economy is most important. Warrior General Purpose Acrylic PVA can also be used as a first coat on raw plaster or as a ceiling paint.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
On new plaster : Apply one coat Warriorfill™. Allow to dry for + 3 hours. Thereafter apply two coats Warrior General Purpose Acrylic PVA allowing 3-4 hours drying time between coats.
PROPERTIES :
APPLICATION: Brush, Roller, Spray*
CLEANING SOLVENT: Water
THINNING SOLVENT: Water
SPREADING RATE:
- PRIMER COAT : 4-6 m² per litre
- FINAL COAT : + 6-8 m² per litre
DRYING TIMES:
- SURFACE DRY : 1 hour
- HARD DRY : 3-4 hours
- OVERCOATING : 3-4 hours
PACK SIZE: 5L, 20L
COLOUR RANGE: White and a select range of Pastel colours only
VISCOSITY: 120-130 Krebb Units (KU)
FLASH POINT: Non Flammable
SCRUB RESISTANCE: + 2000 Oscillations
RELATIVE DENSITY: 1,50 + 0,05 kg per litre
GENERAL INFORMATION :
*For spray application consult our Technical Department.
- Do not apply to bare metal surfaces.
It is important that this product be thoroughly mixed with a flat paddle before use.
Contact us for the Warrior General Purpose Acrylic PVA Paint.