Warrior Anti-fungal Wash
Warrior Anti-Fungal Wash
Back to Warrior Sundry Products
Warrior Anti-Fungal Wash is a clear, liquid biocide solution used to wash down masonry surfaces containing fungus and mould.
USES :
Warrior Anti-Fungal Wash can be used to kill spores and treat mould growth on masonry surfaces e.g. exterior walls, bathroom ceiling etc.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
- If growth is dense, scrape or brush down mould or fungus and wash thoroughly with water. Apply Warrior Anti-Fungal Wash to affected masonry areas very liberally by brush or roller. Allow a contact time of 12 hours or leave to react overnight. Wash thoroughly with water Re-apply a second coat of Anti-Fungal Wash at the recommended spreading rate and allow to dry.
- Finish off with Warrior’s primer/sealer and topcoat.
PROPERTIES :
APPLICATION: Brush or Roller
CLEANING SOLVENT: Water
THINNING SOLVENT: Do not thin
SPREADING RATE: Approx 8-10 m² per litre, but can vary depending on porosity of substrate
PACK SIZE: 5L, 750ml
COLOUR RANGE: Clear liquid
FLASH POINT: Non-Flammable
GENERAL INFORMATION :
a) This material is hazardous and must be kept out of reach of children.
b) When using this product protective clothing, goggles, gloves and a mask must be used, as this material is corrosive to the skin.
c) If material does come into contact with the skin wash thoroughly with water, and seek medical attention if any irritation persists.
Contact us for the Warrior anti-fungal wash.