Skip to main content
012 541 3596

Warrior Galvanised Iron Cleaner

 

Warrior Galvanised Iron Cleaner

Back to Warrior Sundry Products

Warrior Galvanised Iron Cleaner is a pink phosphoric acid based cleaner for removing the manufacturers protective grease coating from the galvanised iron before painting.

USES :

Galvanised iron is always treated with a special protective coating, for the protection against white rust. This must be completely removed prior to the application of any paint. If not removed, there will poor adhesion of the paint to the surface.

SPECIFICATION OR RECOMMENDED PAINT SYSTEM :

The protective storage coating or fabricators grease must be completely removed before any primer or paint is applied to new galvanised surfaces. The surface must then be completely dry. Galvanised Iron Cleaner can be applied by means of a brush or a soft broom in the case of large areas. Leave for 10-15 minutes to react, scrub off completely with a brush or broom, followed by thorough rinsing or hosing with water.

PROPERTIES :

APPLICATION: Brush or soft broom

CLEANING SOLVENT: Water

THINNING SOLVENT: Do not thin

SPREADING RATE: 8-10 m² per litre

PACK SIZE: 1L, 5L

SPECIFIC GRAVITY: 1.0 kg per litre

FLASH POINT: Non-Flammable

GENERAL INFORMATION :

SAFETY PRECAUTIONS :

  • Wear gloves, goggles, gumboots and safety clothing when working with Warrior Galvanised Iron Cleaner and avoid any contact with the skin
  • If Warrior Galvanised Iron Cleaner comes into contact with skin – wash immediately with water.

Contact us for the Warrior Galvanised Iron Cleaner.

Leave a Reply