Warrior Woodtreat Copal Varnish
Back to Warrior Woodtreat
Warrior Woodtreat Copal Varnish is an Alkyd Varnish recommended for interior use on wood surfaces. It provides an attractive economical gloss finish, which brings out the beauty of natural or stained timber.
Warrior Woodtreat Copal Varnish is for use in less critical areas (i.e. where heat, scratch, stain and mar resistance is not critical), e.g. cupboards, shelving, skirting and ceilings.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
SURFACE PREPARATION :
New Wood Surfaces : All surfaces must be sanded smooth clean and dry.
Previously Treated Wood Surfaces : All painted or varnished surfaces must be stripped chemically or mechanically back to the bare wood. Sand the bare wood to a smooth finish and ensure surface is clean, firm and dry before applying Woodtreat Copal Varnish.
RECOMMENDED APPLICATION :
Always stir contents well before use. In addition stir occasionally during application.
It is recommended that the 1 st coat be thinned 10-15% by volume with Warrior Mineral Turps. The 2 nd and 3 rd coats must not be thinned. Allow 24 hours drying time in between coats. It is important to sand lightly between coats for a good finish.
PRODUCT INFORMATION :
APPLICATION: Brush, Roller, Spray*
CLEANING SOLVENT: Mineral Turps
THINNING SOLVENT: Mineral Turps
- PRIMER COAT: 6 m 2 per litre
- FINAL COAT: 8-10 m 2 per litre
- SURFACE DRY: 3-4 hours
- HARD DRY: 16 hours
- OVERCOATING: 24 hours
PACK SIZE: 1L, 5L
COLOUR RANGE: Clear and tinted colours
(Mahogany, Light Oak, Dark Oak,
Teak, Meranti and Imbuia)
SPECIFIC GRAVITY: 0,85 + 0,05 kg per litre
VISCOSITY: 50 – 60 “F4
FLASH POINT: >35ºC
- Not recommended for exterior use due to its limited UV Resistance.
- Not recommended for use on floors or working surfaces eg. counters, desktops etc.
- It is important that this product be thoroughly mixed with a flat paddle before use.
* For spray application contact our Technical Department.
Contact us for the Warrior Woodtreat Copal Varnish.