Warrior Woodtreat Wood Rejuvenator
Woodtreat Wood Rejuvenator
Back to Warrior Woodtreat
USES :
Wood, which has been exposed to the elements, develops an unsightly greyish appearance. Woodtreat Wood Rejuvenator is used to bleach wood back to it’s original appearance prior to varnishing or staining.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
RECOMMENDED APPLICATION
Sand wood lightly, to expose grain. Reduce the Woodtreat Wood Rejuvenator to a liquid form by dissolving the oxalic acid crystals in one litre of warm water stirring with the wooden paddle provided. Apply Woodtreat Wood Rejuvenator Liquid to wood using a scrubbing brush and allow to react for one hour. Rinse wood with clean water and allow to dry completely. Wood can then be coated with Woodtreat Products as per the specifications.
PROPERTIES :
APPLICATION: Brush
CLEANING SOLVENT: Water
THINNING SOLVENT: Do not thin
SPREADING RATE: 6-8 m² per litre depending on porosity of wood
PACK SIZE: 1L
FLASH POINT: Non-Flammable
GENERAL INFORMATION :
SAFETY PRECAUTIONS :
- Avoid any contact with the skin. Any spillages or splashes must be washed off immediately with water.
- Water safety clothing, gumboots, goggles and gloves when working with Warrior Wood Rejuventator.
Contact us for the Warrior Wood Rejuvenator.