Skip to main content
012 541 3596

Warrior Woodtreat Woodseal Exterior

 

Warrior Woodtreat Woodseal Exterior

Back to Warrior Woodtreat

Warrior Woodtreat Woodseal Exterior is a general purpose sealer which penetrates the wood grain and nourishes the wood thus enhancing its natural beauty. It is specially formulated to protect wood against fungal attack and the harsh UV radiation of the sun. Warrior Woodtreat Woodseal Exterior does not peel or flake off on ageing and therefore overcoating is simplified.

Warrior Woodtreat Woodseal Exterior is available in Meranti or Clear (transparent) gloss finish.

USES :

Warrior Woodtreat Woodseal Exterior is ideal for use on exterior garage doors, garden furniture, gates, fascias, pergolas, panelling etc.

SPECIFICATION OR RECOMMENDED PAINT SYSTEM :

SURFACE PREPARATION :

New Wood Surfaces : All surfaces must be sanded to a smooth surface, cleaned and dry.

Previously Treated Wood Surfaces : All painted or varnished surfaces must be stripped chemically or mechanically back to the bare wood. Sand bare wood to a smooth finish and ensure surface is clean, firm and dry before applying any natural wood finish

RECOMMENDED APPLICATION :

Always stir contents well before use and stir occasionally during use as well. Apply the 1 st coat as supplied and allow 16-24 hours to dry. Apply the 2 nd coat and 3 rd coats unthinned allowing

24 hours in between coats and sanding lightly between coats.

PROPERTIES :

APPLICATION: Brush only

CLEANING SOLVENT: Mineral Turps

THINNING SOLVENT: Mineral Turps

SPREADING RATE:

  • PRIMER COAT: 6m 2 per litre
  • FINAL COAT: 8-10 m² per litre

DRYING TIMES:

  • SURFACE DRY: 4-6 hours
  • HARD DRY: 24 hours
  • OVERCOATING: 24 hours

PACK SIZE: 1L, 5L

COLOUR RANGE: Meranti / Clear and tinted colours (Mahogany, Light Oak, Dark Oak, Teak and Imbuia)

SPECIFIC GRAVITY: 0,90 + 0,05 kg per litre

VISCOSITY: 30-40 “F4

FLASH POINT: >35ºC

FINISH: Gloss

GENERAL INFORMATION :

  • Not recommended for spraying and has limited abrasion resistance.
  • A minimum of 3 coats must be applied to achieve a full gloss finish.
  • It is impor­tant that this product be thoroughly mixed with a flat paddle before use.

Contact us for the Warrior Woodtreat Woodseal Exterior

Leave a Reply