Warrior Woodtreat Polyurethane Interior Varnish
Back to Warrior Woodtreat
Warrior Woodtreat Polyurethane Interior Varnish is an extremely tough, hard wearing and mar resistant, quick drying wood varnish.
Warrior Woodtreat Polyurethane Interior Varnish is available in either a suede or gloss finish.
Warrior Woodtreat Polyurethane Interior Varnish is specifically formulated for interior wooden surfaces like tabletops, counters, skirting boards, ceilings, cupboards, banisters, side boards etc.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
SURFACE PREPARATION :
New Wood Surfaces : All surfaces must be sanded, smooth, clean and dry.
Previously Treated Wood Surfaces : All painted or varnished surfaces must be stripped chemically or mechanically back to the bare wood. Sand the bare wood to a smooth finish and ensure surface is clean, firm and dry before applying Warrior Woodtreat Polyurethane Interior Varnish.
RECOMMENDED APPLICATION :
Always stir contents well before use. In addition stir occasionally during application.
It is recommended that the 1 st coat be thinned 10-15% by volume with Warrior Mineral Turps. The 2 nd and 3 rd coats must not be thinned. Allow at least 6 hours drying time in between coats. It is important to sand lightly between coats for a good finish.
PRODUCT INFORMATION :
APPLICATION: Brush, Roller or Spray
CLEANING SOLVENT: Mineral Turps
THINNING SOLVENT: Mineral Turps
- PRIMER COAT: 6 m² per litre
- FINAL COAT: 8-10 m² per litre
- SURFACE DRY: 1 hour
- HARD DRY: 6 hours
- OVERCOATING: 6-8 hours
PACK SIZE: 1L, 5L
COLOUR RANGE: Clear and tinted (Mahogany, Light Oak, Dark Oak, Teak, Meranti and Imbuia)
SPECIFIC GRAVITY: 0,85 +0,05 kg per litre
FLASH POINT: >35ºC
FINISH: Gloss, Suede
a) Not recommended for exterior use due to its limited UV resistance.
b) It is recommended that 2-3 finishing coats be applied for a more durable finish.
c) It is important that this product be thoroughly mixed with a flat paddle before use.
Contact us for the Warrior Woodtreat Polyurethane Interior Varnish.